BRKLC - 383 BROWN ZENTHANE P/N 08606TUZ-GD
- MSDS: BRKLC
- Manufacturer: HENTZEN COATINGS INC
- Product Name: 383 BROWN ZENTHANE P/N 08606TUZ-GD
- National Stock Number: 8010-01-229-7543
Product Identification
Product ID:383 BROWN ZENTHANE P/N 08606TUZ-GD
MSDS Date:04/26/1993
FSC:8010
NIIN:01-229-7543
MSDS Number: BRKLC
Responsible Party
MILWAUKEE, WI 53218-1225
US
Emergency Phone: 414-353-4200
Info Phone: 414-353-4200 / FAX 414-353-0286
Preparer: JANE FREEMAN
Cage: 09225
Contractor
Telephone: 414-353-4200
Cage: 09225
Ingredients
METHYL ISOAMYL KETONE (SOLVENT)
CAS: 110-12-3
RTECS: MP3850000
Fraction By Weight: 24.302%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9293
BLACK IRON OXIDE (PIGMENT) (EXPOSURE LIMITS ARE FOR IRON
CAS: 1317-61-9
Fraction By Weight: 1-5%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3
RED IRON OXIDE (PIGMENT) (EXPOSURE LIMITS ARE FOR IRON
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 1-5%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
SILICA (PIGMENT)
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 20-30%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
HOMOPOLYMER OF HEXAMETHYLENE DIISOCYANATE
CAS: 28182-81-2
RTECS: NQ9170000
Fraction By Weight: 20-30%
TRIVALENT CHROME (INSOLUBLE) (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 5.116%
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
AROMATIC HYDROCARBON (MIXTURE OF C8'S TO C10'S)
CAS: 64742-95-6
Fraction By Weight: 1.198%
BUTYL ACETATE (SOLVENT)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: 1.198%
OSHA PEL 150 PPM
ACGIH TLV: 150 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
HEXAMETHYLENE DIISOCYANATE MONOMER
CAS: 822-06-0
RTECS: MO1740000
Fraction By Weight: 0.048%
OSHA PEL 0.005 PPM
ACGIH TLV: 0.005 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
VM&P NAPHTHA (SOLVENT)
CAS: 8030-30-6
RTECS: DE3030000
Fraction By Weight: 4.959%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
XYLENE (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 1.950%
OSHA PEL 100 PPM/STEL 150 PPM
ACGIH TLV: 100 PPM/STEL 150 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
3.485 LBS/GAL; 417.152 GRAMS/LITER
RTECS: 9999999VO
Hazards
Reports of Carcinogenicity:NTP:UNKNOWN IARC:YES
Health Hazards Acute and Chronic:ACUTE; IRRITATION TO SKIN, EYES, &
RESPIRATORY TRACT (WATERING EYES, DRY THROAT, COUGHING, HEADACHE,
TIGHT CHEST, BURNING SENSATION). HEADACHE, DIZZINESS, NAUSEA MAY BE
EXPERIENCED BY SOME AS A RESULT OF EXPOSURE TO SOLVENTS.
Explanation of Carcinogenicity:IARC HAS LISTED SILICA AS A PROBABLE
HUMAN CARCINOGEN.
Effects of Overexposure:CHRONIC: REPEATED & PROLONGED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE, LIVER, & KIDNEY DAMAGE. RESPIRATORY SENSITIZATION (ASTHMA
LIKE SYMPTOMS), SKIN SENSITI ZATION (RASH, ITCHING, HIVES, SWELLING
OF THE EXTREMITIES). DERMATITIS.
Medical Cond Aggravated by Exposure:ASTHMA AND OTHER RESPIRATORY
AILMENTS; CHEMICAL SENSITIZATION.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM & QUIET. NOTIFY PHYSICIAN. EYES: FLUSH IMMEDIATELY WITH
RUNNING WATER FOR AT LEAST 15 MIN, LIFTING EYELIDS. TAKE TO
PHYSICIAN. SKIN: WASH AFFECTED AREAS WITH SOAP & WATER. REMOVE
CONTAMINATED CLOTHING. WASH BEFORE REUSE. CONSULT PHYSICIAN IF
IRRITATION DEVELOPS/PERSISTS. INGESTION: CALL A PHYSICAN OR POISON
CONTROL CENTER IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:54.0F,12.2C
Autoignition Temp:Autoignition Temp Text:450.0F
Lower Limits:0.9
Upper Limits:8.2
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT WITH SELF-CONTAINED
BREATHING APPARATUS. DURING FIRE, IRRITATING/HIGHLY TOXIC GASES &
SMOKE PRESENT FROM DECOMP/COMBUSTION PRODUCTS.
Unusual Fire/Explosion Hazard:KEEP CNTNR CLSD.KEEP FROM HEAT/IGNIT
SOURCE.CLSD CNTNR MAY EXPLODE W/HEAT,BURST W/WATER CONTAMINATN.
DONT APPLY TO HOT SRFCS.NEVER CUT,WELD NEAR DRUM-EXPLOSIVE.
Accidental Release
Spill Release Procedures:EVAC NON-ESSENTL PEOPLE.REMOVE IGNIT
SOURCE.VENT.AVOID BREATHING.COVER SPILL W/INERT ABSORB.POUR LIQ
DECONTAM OVER SPILLAGE-ALLOW 10 MIN REACT TIME.COLLECT MAT'L IN
OPEN CNTNR ADD DECONTAM SOLUTION.CO VER LOOSELY.WASH DOWN AREA
W/DECONTAM,FLUSH W/H20.
Neutralizing Agent:0-10%AMMONIUM HYDROXIDE,2-5%DETERGENT &
WATER.SOLUTN:TEGRITOL 20%TMN-10,80%WATER
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F OR BELOW 32F.
STORE LARGE QUANTITIES IN BUILDINGS DESIGNED TO COMPLY WITH OSHA
1910.106. KEEP FROM SPARKS & OPEN FLAME.
Other Precautions:KEEP CNTNR CLOSED. IF MOISTURE ENTERS, DONT RESEAL.
DONT INGEST. GROUND CNTNRS WHEN POURING. AVOID LIQ FREE FALL >FEW
INCHES. USE W/VENT & RESP EQUIP. EMPTIED CNTNRS MAY RETAIN HZD
RESIDUE. FOLLOW PRE CAUTIONS. AVOID EYE, SKIN, CLOTH CONTACT
Exposure Controls
Respiratory Protection:USE AIRLINE RESPIRATOR UNLESS AIR SAMPLING SHOWS
EXPOSURE TO BE BELOW PEL. THEN, EITHER CHEMICAL CARTRIDGE
RESPIRATORS OR AIRLINE RESPIRATORS REQUIRED. USE SAME PRECAUTIONS
DURING MIXING OR ANY OPERAT IONS WHERE PAINT FUMES WOULD BE
PRESENT.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP BELOW PEL/TLV DURING
MIXING, APPLICATION, CURING & REMOVE DECOMP PROD (WELD,CUT).
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SAFETY EYEWEAR W/SPLASH GUARD & SIDESHLD
Other Protective Equipment:WEAR PROTECTIVE CLOTHING TO KEEP SKIN
CONTACT AT A MINIMUM.
Work Hygienic Practices:WASH HANDS AND ANY EXPOSED SKIN THOROUGHLY
BEFORE EATING OR SMOKING. SMOKE IN DESIGNATED AREAS ONLY.
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:244 TO 418F
Decomp Temp:Decomp Text:400F,204C
Vapor Pres:15.00
Vapor Density:> AIR
Spec Gravity:1.22
Viscosity:65-68 KU
Evaporation Rate & Reference:FASTER THAN BUTYL ACETATE
Solubility in Water:REACTS WITH WATER
Appearance and Odor:OPAQUE LIQUID, SOLVENT ODOR
Percent Volatiles by Volume:51.55
Stability
Stability Indicator/Materials to Avoid:YES
ONCE MATERIAL HAS BEEN EXPOSED TO ANY OF THE ABOVE OR ATMOSPHERIC
MOISTURE DONT SEAL CNTNR AS CO2 COULD BLDUP IN CNTNR.
Stability Condition to Avoid:CONTAMINATION WITH WATER, EPOXY CATALYSTS,
ALCOHOLS, GLYCOL ETHERS, BASES, METAL COMPLEXES OR OTHER ACTIVE
MATERIALS.
Hazardous Decomposition Products:CO2, CO, OXIDES OF NITROGEN, TRACES OF
HYDROGEN CYANIDE, HEXAMETHYLENE DIISOCYANATE.
Conditions to Avoid Polymerization:SEE ABOVE
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DECONTAMINATE CONTAINERS PRIOR TO DISPOSAL.
======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.